China’s 10-tonne CE-25A electric aircraft has completed its first flight with people on board, a significant test for a proposed 19-passenger aircraft designed for short journeys between cities.
The aircraft took off and landed in Binzhou, Shandong province, on Saturday 14 November 2026. According to its developer, the Commercial Aircraft Corporation of China (COMAC), all key performance indicators met expectations. But it remains a test aircraft, not an approved passenger service.
What happened on the first crewed flight?
Two pilots and a flight-test engineer were aboard the CE-25A. CCTV’s published footage notes say the aircraft spent 16 minutes and 38 seconds in the air, covering 60.4 kilometres. The full test, including ground operations, lasted 57 minutes and 46 seconds, according to specialist aviation reporting.
The flight followed the aircraft’s first uncrewed autonomous test on 2 February 2026 and 19 uncrewed flight validations. COMAC said the plane operated normally during Saturday’s trial. These performance statements are the manufacturer’s assessment, relayed by Chinese state media; they are not equivalent to independently certified commercial performance.
What is the CE-25A designed to do?
COMAC is developing the CE-25A for short commercial routes connecting cities. The specifications reported by Xinhua and CCTV describe a 19-passenger design with a maximum take-off weight of 10 tonnes. That figure refers to the maximum weight of the aircraft when taking off, not the weight of passengers or cargo.
- Proposed passenger capacity: 19
- Maximum take-off weight: 10 tonnes
- Design cruising speed: 300 km/h (about 186 mph)
- Design cruising altitude: 2,400 metres (about 7,900 feet)
- Stated range: 400 km (about 249 miles)
- Propulsion: 10 electric ducted fans distributed along the wings
The range, cruising speed and altitude are published design specifications, rather than figures proven by the short crewed demonstration. No paying passengers were on board.
How does the electric aircraft work?
Rather than burning aviation fuel in conventional turbine engines, the CE-25A uses electric motors to spin ten enclosed fans, arranged five along each wing. This distributed propulsion layout gives the red-and-black aircraft a distinctive appearance and allows thrust to come from several smaller units.
The project involves COMAC, battery manufacturer CATL, Shanghai Jiao Tong University and other partners. However, the companies have not publicly specified the battery chemistry, its installed energy capacity or its weight for this aircraft. It would therefore be misleading to claim that any particular CATL cell technology is confirmed to power the CE-25A.
What has actually been proven?
The test demonstrates that this particular aircraft can complete a controlled crewed flight using its electric propulsion system. That is a meaningful engineering achievement for a machine in the 10-tonne class, particularly after a series of uncrewed tests.
It does not yet establish that the aircraft can carry 19 paying passengers over 400 km, make repeated departures on a commercial timetable or meet all the safety and performance requirements for airline operations. Saturday’s 60.4 km test covered around 15% of the quoted design range, and there is no published figure showing how much battery charge it used.
Why are electric passenger aircraft difficult to build?
The central challenge is energy storage. Batteries make it possible to run electric motors without burning fuel during flight, but they store considerably less energy per unit of weight than aviation fuel. Carrying more battery mass can reduce the weight available for passengers and baggage.
Commercial operations also have to account for spare energy reserves, weather, airport diversions, battery ageing, charging time and the practical cost of turning aircraft around between flights. Electric propulsion could reduce local emissions and noise, but total climate benefits depend in part on how the electricity and batteries are produced.
Is China the first country to fly a large electric aircraft?
No. Electric flight is already established in smaller aircraft, and other manufacturers are testing larger demonstrators. The CE-25A is a notable step for COMAC, but not the world’s first crewed electric aircraft.
In the United States, Heart Aerospace flew its battery-electric X1 test aircraft for 27 minutes on 12 August 2026 at Plattsburgh International Airport, New York. Heart describes that demonstrator as part of work towards its proposed 30-seat ES-30 hybrid-electric regional airliner. The X1 demonstration is not the same as a certified commercial passenger service either.
The projects use different designs and development approaches, making simple comparisons of range or aircraft size unreliable. Both demonstrate progress towards electrifying regional aviation, while leaving major certification and operational questions unanswered.
When could passengers fly on the CE-25A?
There is no confirmed commercial launch date, airline customer or announced passenger route. China’s Civil Aviation Administration has accepted COMAC’s application for a type certificate, which begins regulatory examination of the aircraft’s design. Accepting the application is not the same as granting certification.
Before regular passenger services can begin, the aircraft must complete further testing and obtain the relevant approvals. For now, the most accurate conclusion is that China has shown a substantial electric regional aircraft can fly with a test crew, not that everyday electric airline travel has arrived.
Sources and further reading
- CCTV Video News Agency, flight footage and detailed test figures, 14 November 2026
- Xinhua report carried by CCTV, aircraft specifications and development partners, 15 November 2026
- Euronews, independent account of the test and certification status, 15 November 2026
- AeroTime, additional aviation-industry context, 15 November 2026
- Heart Aerospace, primary announcement of the X1 test flight, 13 August 2026


